Replacing a Failed Disk in a Distributed Storage Environment

nexus

Step 1: Enable or disable data recovery in the storage UI
Detailed operation steps:

Log in to the storage interface, go to global settings in the lower left corner, and disable data recovery.
Execution result check: Data recovery is successfully disabled.

Step 2: Remove the data disk from the storage pool
Detailed operation steps:

Select the storage pool, select more operations, and remove the corresponding physical machine hard drive.
Execution result check: Hard drive removal is successful.

Step 3: Delete the data disk
Detailed operation steps:

Select hard drive management, delete the corresponding physical machine hard drive, and select delete.
Execution result check: Disk deletion is successful.

Step 4: Hot-swap the hard drive
Detailed operation steps:

Hot-swap the hard drive for the current physical machine.
Execution result check: After the hard drive is successfully replaced, the system correctly identifies the data disk.

Step 5: Add a data disk
Detailed execution steps: